We offer three types of vibrators for use with Vibe Tables, Casting Carts, etc – anywhere you want to apply vibration during a casting process:
- Pneumatic Ball Type
- Pneumatic Turbine
- Electric
Pneumatic Ball Type Table Vibrators
For use on Casting Carts, Vibe Tables, or other carts or tables where vibration is desired during casting.
Gruber Pneumatic Ball Type Vibrators (sometimes referred to as Rotary Vibrators) are used in vibrate excess air out of marble matrix after pouring. These vibrators provide high-frequency vibration at an economical price. The only moving part is a high-grade chrome steel ball. Lubrication, while not required, extends the life of the units. Other uses these vibrators are for small hoppers, parts feeders, chutes and match plates. Air consumption for these units is moderate. If the application requires more than three hours per day of operation or requires lubrication-free operation, the Turbine Vibrators may be a better choice.
Vibrolator™ DV and CV Series Ball Type Vibrators
These ball type vibrators are extra heavy-duty construction for operation in adverse conditions or water, heat, cold and grit. Vibration is controlled from a few cycles per minute to full speed by installation of a needle valve or pressure regulator. These vibrators assure satisfactory and efficient vibration for the toughest jobs.
DV-41 Ball-type Pneumatic Vibrator
The "go-to" pneumatic vibrator for big jobs!
These vibrators produce all directional vibration required for big jobs, and meets rugged requirements on extra large bins and hoppers. Both feature migratory, replaceable races. For very rigid hoppers or chutes, the #41 vibrator is without equal. Ideal for larger weigh batchers in ready-mix plants. Features migratory, replaceable races.
Order Information:
DV-41 - #02014
Vibrolator™ CV-25 Ball Type Pneumatic Vibrator
Model CV-25 extra heavy-duty construction for operation in adverse conditions or water, heat, cold and grit. Vibration is controlled from a few cycles per minute to full speed by installation of a needle valve or pressure regulator. These vibrators assure satisfactory and efficient vibration for the toughest jobs. Includes muffler.
Order Information:
CV-25 - #02012
Vibrolator™ CV-35 Ball Type Pneumatic Vibrator
Same as CV-25 vibrator above, but produces up to 675 lbs force at 10,000 VPM. Includes muffler.
Order Information:
CV-35 - #02013
Pneumatic Turbine Vibrators
Turbine Vibrators Outperform Piston and Ball Vibrators
Vibco VS Series Turbine Vibrators
VIBCO is the originator of Silent Turbine Vibrator technology and manufactures a complete line of turbine vibrators for industrial and construction use. VIBCO’s Silent Turbine Vibrators are an ideal solution. They save air, are more efficient, don’t require lubrication, and have virtually silent operation. A turbine vibrator will typically outlast a ball vibrator 3 to 1.
With foolproof operation and low noise, Silent Turbine Vibrators have quickly become the specified and standard units for many industries. Some typical applications include parts feeding, batchers, hoppers, chutes, packaging, foundry match-plates, shake-outs and sand hoppers, screens, and wherever parts or material hangs.
Order Information:
VS-380 Vibrator – #VS-380
Electric Vibrators
For the heaviest-duty requirements
Electric Vibrators
Electric vibrators are designed and built to withstand the rigors of the industrial environment and operate in a continuous duty cycle. These vibrators are so tough they are guaranteed them for 3 years even when operated at 100% amplitude setting, in a 24/7 operating environment. Each vibrator is manufactured using the latest automated techniques, insuring exact bearing and seal fits. Add vacuum impregnated windings and you have a high performance vibrator second to none. Explosion-proof.
- 230/460V, 60Hz, 3-Phase
- 1.5/.75 Amps @ 3600 RPM
Order Information:
230/460V, 60Hz, 3-Phase Electric Vibrator - #0831174
Replacement Vibrator Mufflers
Vibrator Mufflers are used to further reduce noise during vibration. Refer to Vibrators above for compatibility information.
For CV-25 & CV-35 Vibrators
#02015
For DV-41 Vibrator
#02017
Replacement Vibrator Bushings
These and other Vibe Table Bushings and Table Vibrator spare parts are available:
Please View or Download Bulletin for individual bushing details
Vibrator Isolation Bushings for "New Style" Gruber Vibration Tables.
Note: "New Style" means Gruber Pneumatic Vibration Tables constructed of Tubular Steel Frame members.
Order Information:
Replacement Kit of 8 Bushings (to replace all 8 bushings) - #023007K
Note: No longer sold individually.
"Old Gruber Vibe Table Style" Vibration Tables Replacement Bushings
For use with old style (no longer manufactured) Gruber pneumatic Vibration Tables with channel top frames. Old Style "stepped" vibe bushing, for use with old style tables with channel top frames. NOTE: Call before ordering. Limited Supplies available.
Order Information:
Replacement Bushing (Each) - #023008
Black Vibe Bushings - for Electric Vibe Tables
Order Information:
Replacement Bushing (Each) #023005
Replacement Kit of 8 Bushings (to replace all 8 bushings) - #023005K
