Slip Resistance Test Report that applies to the slip-resistant floor texture pattern used on all 1050 and 1051 Series Gruber Shower Pan molds and Universal Shower Ramp.
A test sample was submitted to an authorized test lab for slip resistance testing. These are the results of that testing:
Testing Lab:
SGS U.S. Testing Company, Inc.
1341 North 108th East Avenue
Tulsa, OK 74116
Report Number: 146695-1 | Report Date: 10/6/00 |
Report of Test
Subject:
|
Slip Resistance Evaluation
|
Sample ID:
|
One Cultured Marble model 1051-06 36 x 36 shower pan was received from the client on 9/20/00. The unit was received in good condition.
|
Procedure:
|
The unit was evaluated in accordance with ASTM F 462-1994. No revisions to this report will be allowed after 90 days of the report date.
|
Results:
|
See below
|
Date Tested:
|
9/20/00
|
Conclusion:
|
The unit does comply with the requirements of ASTM F 462-1994
|
Certification:
|
The tests reported here were conducted under the continuous, direct supervision of SGS U.S. Testing Company Inc., Tulsa, OK
|
Coefficient of Friction data:
Summary: Measured values of textured surface zones ranged from 0.11 - 0.16:
Measurement Zone:
|
Co-efficient of Friction:
|
1
|
0.11
|
2
|
0.16
|
3
|
0.14
|
4
|
0.15
|
5
|
0.14
|
6
|
0.14
|
7
|
0.12
|
8
|
0.13
|
9
|
0.14
|
Least Co-efficient of Friction: 0.11 in Zone 1 (0.04 minimum)
Pattern Coverage: A 1.5 inch x 3 inch template located anywhere on the bathing surface does cover a textured area.
Texture Description: Rough Texture
*******
End of Report